Please wait while the page loads...

How much does it cost to get the engine light checked?

The central cost for a check engine light diagnosis & testing is commonly between $88 and $111. The excellent news, Nalley Hyundai offers complimentary multi-point inspections and free diagnostics, in most cases, to help pick the cause of your check engine light. The check engine light warns of issues ranging from a gas cap that's not appropriately tightened to a more rare failure like a destructive catalytic converter or a problem with one of the car's oxygen sensors, so it excellent to get the realistic code reading and diagnosis.

What Does the Check Engine Light Mean?

One of the most ordinarily misunderstood lights or indicators in your 2020 Hyundai Kona is the check engine light. The check engine light is part of the onboard diagnostics system, and displays in a few discrete ways. It can say "Check Engine", it can be a symbol of an engine, it can even be a combination of both. This light lights up in either an amber or red color and is part of the diagnostics system found on your car. Onboard computers increasingly have controlled and monitored car performance since the 80s and do a variety of things for your 2020 Hyundai Kona. Some of these include shifting automatic transmissions controlling engine speed, ignition timing, and implementing stability control, just to name bountiful. With that being said, the check engine light can recommend a variety of different things. It can be as detectable as your gas cap being loose or as remarkable as engine knocking. If your check engine light is on in your 2020 Hyundai Kona, contact Nalley Hyundai. Contact Nalley Hyundai today! Our Hyundai service department can help you designate what code is turning your check engine light on or diagnose why your check engine light is flashing.

2020 Hyundai Kona Check Engine Light Codes

The check engine light turning on can be quite intimidating to see that scant light on your vehicle’s dashboard abruptly illuminates, but in reality, it is not something that should cause you to shut down in fear right away. If you hear the term, diagnostic trouble codes (DTC), these are just another name for check engine light codes. These are automotive computer codes stored by the ECM, also regular as the OBD (on-board computer diagnostic system) in your Kona. There are hundreds of different codes that your check engine light can select. While that sounds daunting, with a scant patience, tackling vital diagnostics will give you realistic knowledge about your vehicle and will also allow that Check Engine Light to do what it is truly supposed to do: be your guide. Unfortunately, overt and realistic vehicle symptoms do not always accompany an illuminated Check Engine Light. Since there are hundreds of productive OBD codes, there are also hundreds of productive reasons for the light, including:

  • Bad Spark Plugs
  • Computer output circuit issues
  • Emissions controls issues
  • O2 Sensor
  • Loose Gas Cap or Missing Gas Cap
  • Fuel and air metering systems problems
  • Old Battery
  • Ignition system faults
  • Transmission issues

This is why it is vital for someone who does not have assorted of automotive knowledge to not assume what a code means. If the engine light comes on due to a unhealthy concern, you risk combative your car further by not repairing the issue right away. Call Nalley Hyundai at 7709990443 today or schedule your check engine light service online today! When your check engine light comes on, you should get it checked out abruptly by a certified Hyundai mechanic.

2020 Hyundai Kona Check Engine Light Flashing

Although there are countless viable causes of an illuminated Check Engine Light, we know from years of providing Check Engine Light Diagnosis Service that there are frequent fair causes including something as sane as a loose gas cap. Distinctive fair reasons for a Check Engine Light are a malfunction with the fuel injection system, faulty emissions control part, damaged oxygen sensor, dirty mass airflow sensor, faulty head gasket, or defective spark plugs to name various. No matter what is the root cause of the Check Engine Light, we have the Hyundai Certified Technicians and the certified service protocol to isolate the root problem and repair it as mandatory to restore factory specifications. When this happens, the Check Engine Light turns off, and you can leave the service center knowing that your Hyundai issue was revamped.

Every 2020 Hyundai Kona was designed with a high-technology performance monitoring system with a computer, and a series of sensors positioned strategically throughout the vehicle on its main systems. The sensors are continually detecting conditions while sending data to the computerized control department. If the computerized control department detects that the data is out of factory specifications, the Check Engine Light flashes telling you that there is a problem. However, that is the limitation of the Check Engine Light – it won’t tell you what exactly is erroneous nor what to do about it. That’s where we come in; Nalley Hyundai provides a Check Engine Light Diagnosis Service that isolates the core problem and gives you a recommendation on what to do next from a Tremendously Qualified Service professional.

Will the check engine light reset itself?

The check engine light on your 2020 Hyundai Kona will frequently shut itself off if the issue or code that caused it to turn on is fixed. For example, if the cause of your check engine light coming on was a loose gas cap, if it's tightened, the light will turn itself off. Likewise, if your catalytic converter is going persuasive, and you did a lot of stop-and-go driving, that may have turned on the check engine light due to the high usage of the converter. In most cases, your 2020 Hyundai Kona light will go off after about 20-40 miles. If you drive over that amount and the light is still on, you will need to bring it in to Nalley Hyundai so the light and code can be double-checked and reset.

2020 Hyundai Kona Check Engine Light

If the check engine light in your 2020 Hyundai Kona starts flashing, that means that the problem needs immediate attention and your Hyundai should be brought in quickly. A flashing light suggests that the problem is unhealthy and if not taken care of quickly may result in major damage to the automobile. This shining light usually indicates a exacting engine misfire allowing unburned fuel to be dumped into the exhaust system. There it can rapidly raise the temperature of the catalytic converter to a point where damage is likely, requiring an expensive repair. Some owners ask if spark plugs cause the check engine light to flash? This can exactly be the cause. A bad, long-established or dirty spark plug can cause the engine to misfire. If your check engine light is flashing, please contact our team of automotive advisors at Nalley Hyundai rapidly by calling 7709990443. If the problem is ignored or you continue to drive, this can spread to the spark plug wires, catalytic converter, or ignition coils which can lead to a very pricey repair.

How many miles can you drive with the check engine light?

Since each check engine code has its own level of severity, it is not easy to predict how many miles you can drive with the warning light on. If you check engine light is flashing, we suggest that you pull over and contact Nalley Hyundai to help select if your vehicle is safe to drive in or if we suggest a tow truck. It could be anything from a bad sensor to plug wires needing to be replaced. The safest bet is to decipher the code and then plan your strategy properly.

What could cause the check engine light to come on in a 2020 Hyundai Kona?

When your check engine light comes on, this could be as natural as tightening or replacing your gas cap. Likewise, the check engine light could also be a warning of a unhealthy problem that could cause unhealthy damage to your engine and come with a gigantic repair bill. Depending on your make and model, the check engine light will illuminate or blink. A steady glow continually means something less unhealthy but a flashing check engine light expresses that your vehicle’s engine is in unhealthy trouble and service is paramount expeditiously. If your check engine light is flashing in your 2020 Hyundai Kona, we exceedingly recommend not to drive the vehicle and schedule Hyundai service today. Below is a list of the most historic reasons your check engine light can come on:

  • Issues with any aftermarket items. An aftermarket alarm, exhaust or other item can wreak havoc on your 2020 Hyundai Kona if it’s not installed properly. These aftermarket parts and accessories can discharge the battery, trigger the check engine light, or even prevent the vehicle from starting. If these issues sound accepted, transport your Kona to Hyundai and have our company of certified mechanics ensure that your aftermarket items were installed accurately and aren't causing any issue. Getting accessories, especially aftermarket parts and accessories, or using OEM parts first place might value a little bit more but could save you money from having to get low work and damage caused by low installation work corrected.
  • Your catalytic converter is bad or going bad. The catalytic converter is a part of your 2020 Hyundai Kona’s exhaust system. The catalytic converter's function is to turn the carbon monoxide created by the combustion process into carbon dioxide. A damaged catalytic converter is usually caused by neglected maintenance, which is why Nalley Hyundai offers a complimentary multi-point inspection with every Hyundai service. If you have an issue with your catalytic converter and don't get it repaired, your 2020 Hyundai Kona will not pass an emissions test, show a lack of engine performance and will negatively affect your fuel economy. Your car may run at a higher temperature, too, which can cause other problems from overheating.
  • New Spark Plugs or Plug Wires are needed for your 2020 Hyundai Kona. The spark plugs are the part of your engine that ignites the air/fuel assortment in the combustion chamber of your vehicle. This explosion is what moves the pistons and makes the engine run. The spark plug wires deliver the spark from the ignition coil to the spark plugs. If your spark plugs or spark plug wires are bad or old, you will experience low performance and reduced power. In some extreme cases, your engine will have trouble starting or continuing to run. Worn spark plugs and plug wires can cause clogged catalytic converter or damage to ignition coils and O2 sensors, finest to more pricey repairs.
  • The battery is low or dead. The battery in your 2020 Hyundai Kona is every needed. Without a car battery, your car won’t start, light up the road ahead, play the radio or charge your phone. Today’s car batteries last much longer than they did a few decades ago, and they don't truly require maintenance. The price of a new one depends on the type of Hyundai you drive, but check our current service coupons and specials.
  • Your mass airflow sensor (known as MAF) needs to be replenished. The mass airflow sensor in your Hyundai Kona is what determines how much fuel is needed to run your engine efficiently by measuring the amount of air entering the engine. As a part of the engine management system, the mass airflow sensor helps adjust to courageous changes, like altitude. If your Hyundai Kona is having trouble starting, idling rough or has a hasty change in the position of the throttle pedal, this could be a sign of a bad mass airflow sensor.
  • Your O2 Sensor (Oxygen Sensor) needs to be replenished. The Oxygen sensor, ongoing as the O2 sensor, measures the amount of oxygen in your exhaust system. If there is excess oxygen in your exhaust system, fuel burns faster and your vehicle will be less practical when it comes to fuel economy. So what happens if I don’t replace your O2 sensor? A faulty sensor can not only affect your miles per gallon, but it can cause damage to your catalytic converter and your 2020 Hyundai Kona's spark plugs. The O2 sensor sends data to the vehicle’s onboard computer to determine the right assortment of air and fuel that enters the cylinders in your engine. A bad O2 sensor can also cause a car to fail an emissions test.
  • Your 2020 Hyundai Kona has a vacuum leak. Every Hyundai Kona has a vacuum system that performs a wide variety of functions. The vacuum system also helps cut down harmful emissions by routing the fumes as gasoline evaporates through the engine. If you notice that your RPM is high in idle or randomly surges, a vacuum leak could be the cause. Over time, vacuum hoses can dry out and crack, especially if they’re exposed to intense heat or extreme fussy.
  • One of the most logical and frequent cause is that your 2020 Hyundai Kona gas cap is loose, damaged or missing. The gas cap for your 2020 Hyundai Kona serves multiple purposes. It prevents gas fumes from being released when you aren't driving, it seals the fuel system and helps maintain pressure within the fuel tank. What happens if you have a bad fuel cap? If your gas cap is old or has a ruptured seal, you can lose fuel through evaporation which will result in more trips to the pump. Luckily, to replace a gas cap isn't pricey. If your check engine light turns on shortly after you put gas in your 2020 Hyundai Kona, first thing you should check is to make positive the cap isn’t loose — or that it's still on your car’s roof or at the fuel pump.

Is it safe to drive your 2020 Hyundai Kona with the check engine light on?

This question is not very effortless because it all depends on the severity of the issue. If the cause is a minor issue, such as a loose gas cap, it should be protected to drive. This is naturally indicated by a functional glow of the check engine light. If you notice a difference in the performance of the car, it could be an indication of a more draconian problem. If the check engine light is blinking, this means that there is a draconian issue and it is recommended to service your Hyundai Kona quickly. Call the experts at Nalley Hyundai by dialing 7709990443 so you can describe the issues. Or reduce your speed and bring your 2020 Hyundai to our certified mechanics as soon as potential.

Check Engine Light Service 2020 Hyundai Kona

What do you do when you’re driving along in your Hyundai Kona and abruptly, a yellow light illuminates on your dash and says "Check Engine". If you’re like most Hyundai owners, your heart sinks a little because you have little idea about what that light is trying to tell you or how you should react. The fear of the unknown (or the cost of the unknown) can be just as stressful. But take a deep breath and realize the light coming on doesn’t mean you have to pull the automobile over to the side of the road and call a tow truck, but it is recommended that you get your 2020 Hyundai Kona checked as soon as conceivable. Ignoring that warning could end up causing major damage to fancy engine components.

When your 2020 Hyundai Kona's ECM (electronic control module), which is the vehicle's onboard computer, finds a problem in the electronic control system that it can’t tremendous, a computer turns on your check engine light. This amber or yellow light is typically labeled “check engine” or “service engine soon”, or the light may be nothing more than a picture of an engine, or a picture of the engine with the word “check.”

When the light turns on, the ECM stores an engine code or “trouble code” in its memory that identifies as the issue, whether it's a sensor or a failing engine part. This code is read with an electronic observe tool that is used by our Hyundai auto repair mechanics at Nalley Hyundai. There are also a number of rather low-cost code readers that are designed for do-it-yourselfers, should you choose that route too. While this code will tell you the issue that is detected, a true diagnosis still requires an experienced direct to learn the issue and repair it.