Please wait while the page loads...

How many miles can you drive with the check engine light?

The safest bet is to decipher the code and then plan your strategy accordingly. Since each check engine code has its own level of severity, it is difficult to predict how copious miles you can drive with the warning light on. If you check engine light is flashing, we recommend that you pull over and contact Nalley Hyundai to help hint if your vehicle is safe to drive in or if we recommend a tow truck. It could be anything from a bad sensor to plug wires needing to be replaced.

How much does it cost to get the engine light checked?

The check engine light warns of issues ranging from a gas cap that's not properly tightened to a more precarious failure like a harmful catalytic converter or a problem with one of the car's oxygen sensors, so it exciting to get the apt code reading and diagnosis. The average price for a check engine light diagnosis & testing is commonly between $88 and $111. The exciting news, Nalley Hyundai offers complimentary multi-point inspections and free diagnostics, in most cases, to help indicate the cause of your check engine light.

Check Engine Light Service 2019 Hyundai Kona

What do you do when you’re driving along in your Hyundai Kona and promptly, a yellow light flashes on your dash and says "Check Engine". If you’re like most Hyundai owners, your heart sinks a small because you have small idea about what that light is trying to tell you or how you should react. The fear of the unknown (or the price of the unknown) can be just as stressful. But take a deep breath and realize the light coming on doesn’t mean you have to pull the car over to the side of the road and call a tow truck, but it is recommended that you get your 2019 Hyundai Kona checked as soon as agreeable. Ignoring that warning could end up causing energetic damage to lavish engine components.

When your 2019 Hyundai Kona's ECM (electronic control module), which is the vehicle's onboard computer, finds a problem in the electronic control system that it can’t noble, a computer turns on your check engine light. This amber or yellow light is commonly labeled “check engine” or “service engine soon”, or the light may be nothing more than a picture of an engine, or a picture of the engine with the word “check.”

When the light turns on, the ECM stores an engine code or “trouble code” in its memory that identifies as the issue, whether it's a sensor or a failing engine part. This code is pick with an electronic audit tool that is used by our Hyundai auto repair technicians at Nalley Hyundai. There are also a number of relatively decent code readers that are designed for do-it-yourselfers, should you opt for that route too. While this code will tell you the issue that is detected, a true diagnosis still requires an experienced professional to pick the issue and repair it.

What could cause the check engine light to come on in a 2019 Hyundai Kona?

When your check engine light comes on, this could be as authentic as tightening or replacing your gas cap. Likewise, the check engine light could also be a warning of a risky problem that could cause risky wear and tear to your engine and come with a great repair bill. Depending on your make and model, the check engine light will illuminate or blink. A steady glow commonly means something less risky but a flashing check engine light suggests that your vehicle’s engine is in risky trouble and service is needed today. If your check engine light is flashing in your 2019 Hyundai Kona, we very endorse not to commute the vehicle and schedule Hyundai service at this moment. Below is a list of the most acceptable reasons your check engine light can come on:

  • Your 2019 Hyundai Kona has a vacuum leak. All Hyundai Kona has a vacuum system that performs a wide variety of functions. The vacuum system also helps lower harmful emissions by routing the fumes as gasoline evaporates through the engine. If you notice that your RPM is high in idle or randomly surges, a vacuum leak could be the cause. Over time, vacuum hoses can dry out and crack, especially if they’re exposed to hefty heat or extreme bleak.
  • New Spark Plugs or Plug Wires are basic for your 2019 Hyundai Kona. The spark plugs are the part of your engine that ignites the air/fuel mixture in the combustion chamber of your vehicle. This explosion is what moves the pistons and makes the engine run. The spark plug wires deliver the spark from the ignition coil to the spark plugs. If your spark plugs or spark plug wires are bad or erstwhile, you will experience low performance and reduced power. In some extreme cases, your engine will have trouble starting or continuing to run. Worn spark plugs and plug wires can cause clogged catalytic converter or damage to ignition coils and O2 sensors, first-rate to more lavish repairs.
  • Your catalytic converter is bad or going bad. The catalytic converter is a part of your 2019 Hyundai Kona’s exhaust system. The catalytic converter's function is to turn the carbon monoxide created by the combustion process into carbon dioxide. A damaged catalytic converter is usually caused by neglected maintenance, which is why Nalley Hyundai offers a complimentary multi-point inspection with all Hyundai service. If you have an issue with your catalytic converter and don't get it repaired, your 2019 Hyundai Kona will not pass an emissions test, show a lack of engine performance and will negatively affect your fuel economy. Your car may run at a higher temperature, too, which can cause extra problems from overheating.
  • One of the most constitutional and bountiful cause is that your 2019 Hyundai Kona gas cap is loose, damaged or missing. The gas cap for your 2019 Hyundai Kona serves multiple purposes. It prevents gas fumes from being released when you aren't driving, it seals the fuel system and helps maintain pressure within the fuel tank. What happens if you have a bad fuel cap? If your gas cap is erstwhile or has a ruptured seal, you can lose fuel through evaporation which will result in more trips to the pump. Luckily, to replace a gas cap isn't lavish. If your check engine light turns on abruptly after you put gas in your 2019 Hyundai Kona, first thing you should check is to make sure the cap isn’t loose — or that it's still on your car’s roof or at the fuel pump.
  • Your mass airflow sensor (known as MAF) needs to be replaced. The mass airflow sensor in your Hyundai Kona is what determines how much fuel is basic to run your engine efficiently by measuring the amount of air entering the engine. As a part of the engine management system, the mass airflow sensor helps adjust to vital changes, like altitude. If your Hyundai Kona is having trouble starting, idling rough or has a fast change in the position of the throttle pedal, this could be a sign of a bad mass airflow sensor.
  • Your O2 Sensor (Oxygen Sensor) needs to be replaced. The Oxygen sensor, constitutional as the O2 sensor, measures the amount of oxygen in your exhaust system. If there is excess oxygen in your exhaust system, fuel burns faster and your vehicle will be less practical when it comes to fuel economy. So what happens if I don’t replace your O2 sensor? A faulty sensor can not only affect your miles per gallon, but it can cause damage to your catalytic converter and your 2019 Hyundai Kona's spark plugs. The O2 sensor sends data to the vehicle’s onboard computer to opt for the right mixture of air and fuel that enters the cylinders in your engine. A bad O2 sensor can also cause a car to fail an emissions test.
  • Issues with each aftermarket items. An aftermarket alarm, exhaust or extra item can wreak havoc on your 2019 Hyundai Kona if it’s not installed properly. These aftermarket parts and accessories can dump the battery, trigger the check engine light, or even avert the vehicle from starting. If these issues sound aware, bring your Kona to Hyundai and have our department of certified mechanics ensure that your aftermarket items were installed correctly and aren't causing each issue. Getting accessories, especially aftermarket parts and accessories, or using OEM parts first place might rate a little bit more but could save you money from having to get low work and damage caused by low installation work corrected.
  • The battery is low or dead. The battery in your 2019 Hyundai Kona is all basic. Without a car battery, your car won’t start, light up the road ahead, play the radio or charge your phone. Today’s car batteries last much longer than they did a few decades ago, and they don't certainly require maintenance. The cost of a new one depends on the type of Hyundai you drive, but check our existing service coupons and specials.

What Does the Check Engine Light Mean?

One of the most typically misunderstood lights or indicators in your 2019 Hyundai Kona is the check engine light. The check engine light is part of the onboard diagnostics system, and displays in a few disparate ways. It can say "Check Engine", it can be a symbol of an engine, it can even be a combination of both. This light illuminates in either an amber or red color and is part of the diagnostics system found on your vehicle. Onboard computers increasingly have controlled and monitored vehicle performance since the 80s and do a variety of things for your 2019 Hyundai Kona. Some of these include ignition timing, shifting automatic transmissions controlling engine speed, and implementing stability control, just to name a few. With that being said, the check engine light can indicate a variety of contrasting things. It can be as simple as your gas cap being loose or as dangerous as engine knocking. If your check engine light is on in your 2019 Hyundai Kona, contact Nalley Hyundai. Our Hyundai service department can help you find out what code is turning your check engine light on or diagnose why your check engine light is glaring. Contact Nalley Hyundai today!

2019 Hyundai Kona Check Engine Light Flashing

Although there are countless potential causes of an illuminated Check Engine Light, we know from years of providing Check Engine Light Diagnosis Service that there are plentiful normal causes including something as common as a loose gas cap. Added normal reasons for a Check Engine Light are faulty head gasket, dirty mass airflow sensor, damaged oxygen sensor, a malfunction with the fuel injection system, faulty emissions control part, or defective spark plugs to name a few. No matter what is the root cause of the Check Engine Light, we have the Hyundai Certified Technicians and the certified service protocol to isolate the root problem and repair it as needed to restore factory specifications. When this happens, the Check Engine Light turns off, and you can leave the service center knowing that your Hyundai issue was fixed.

Every 2019 Hyundai Kona was designed with a high-technology performance monitoring system with a computer, and a series of sensors positioned strategically throughout the vehicle on its crucial systems. The sensors are continually detecting conditions while sending data to the electronic control unit. If the electronic control unit detects that the data is out of factory specifications, the Check Engine Light illuminates telling you that there is a problem. However, that is the limitation of the Check Engine Light – it won’t tell you what strictly is mistaken nor what to do about it. That’s where we come in; Nalley Hyundai provides a Check Engine Light Diagnosis Service that isolates the core problem and gives you a recommendation on what to do next from a Extraordinarily Qualified Service trained.

Is it safe to drive your 2019 Hyundai Kona with the check engine light on?

This question is not very easy because it all depends on the severity of the issue. If the cause is a minor issue, such as a loose gas cap, it should be safe to commute. This is frequently indicated by a steady glow of the check engine light. If you notice a difference in the performance of the vehicle, it could be an indication of a more risky problem. If the check engine light is shining, this means that there is a risky issue and it is recommended to service your Hyundai Kona hastily. Call the experts at Nalley Hyundai by dialing 7709990443 so you can describe the issues. Or cut your speed and bring your 2019 Hyundai to our certified mechanics as soon as probable.

2019 Hyundai Kona Check Engine Light Codes

The check engine light turning on can be quite intimidating to see that slight light on your vehicle’s dashboard suddenly illuminates, but in reality, it is not something that should cause you to shut down in fear right away. If you hear the term, diagnostic trouble codes (DTC), these are just another name for check engine light codes. These are automotive computer codes stored by the ECM, also traditional as the OBD (on-board computer diagnostic system) in your Kona. There are hundreds of other codes that your check engine light can designate. While that sounds daunting, with a slight patience, tackling basic diagnostics will give you comfortable knowledge about your vehicle and will also allow that Check Engine Light to do what it is really supposed to do: be your guide. Unfortunately, assorted and helpful vehicle symptoms do not always accompany an illuminated Check Engine Light. Since there are hundreds of possible OBD codes, there are also hundreds of possible reasons for the light, including:

  • Emissions controls issues
  • Fuel and air metering systems problems
  • Computer output circuit issues
  • Loose Gas Cap or Missing Gas Cap
  • Bad Spark Plugs
  • Ignition system faults
  • Transmission issues
  • Old Battery
  • O2 Sensor

This is why it is exciting for someone who does not have a lot of automotive knowledge to not assume what a code means. Call Nalley Hyundai at 7709990443 today or schedule your check engine light service online today! If the engine light comes on due to a critical concern, you risk damaging your car additional by not repairing the issue right away. When your check engine light comes on, you should get it checked out quickly by a certified Hyundai mechanic.

Will the check engine light reset itself?

The check engine light on your 2019 Hyundai Kona will usually shut itself off if the issue or code that caused it to turn on is fixed. For example, if the cause of your check engine light coming on was a loose gas cap, if it's tightened, the light will turn itself off. Likewise, if your catalytic converter is going exact, and you did assorted of stop-and-go driving, that may have turned on the check engine light due to the high usage of the converter. In most cases, your 2019 Hyundai Kona light will go off after about 20-40 miles. If you drive over that amount and the light is still on, you will need to bring it in to Nalley Hyundai so the light and code can be double-checked and reset.

2019 Hyundai Kona Check Engine Light

If the check engine light in your 2019 Hyundai Kona starts shining, that means that the problem needs immediate attention and your Hyundai should be brought in instantly. A shining light indicates that the problem is active and if not taken care of instantly may result in extensive damage to the vehicle. This flashing light usually indicates a relentless engine misfire allowing unburned fuel to be deposited into the exhaust system. There it can instantly raise the temperature of the catalytic converter to a point where damage is likely, requiring an expensive repair. Some owners ask if spark plugs cause the check engine light to flash? This can exactly be the cause. A aggressive, old or dirty spark plug can cause the engine to misfire. If your check engine light is flashing, please contact our department of automotive specialists at Nalley Hyundai urgently by calling 7709990443. If the problem is ignored or you continue to commute, this can spread to the spark plug wires, catalytic converter, or ignition coils which can lead to a exceedingly fancy repair.