Please wait while the page loads...

2017 Hyundai Santa Fe Check Engine Light Flashing

Although there are several potential causes of an illuminated Check Engine Light, we know from years of providing Check Engine Light Diagnosis Service that there are various normal causes including something as sane as a loose gas cap. Other normal reasons for a Check Engine Light are faulty head gasket, damaged oxygen sensor, dirty mass airflow sensor, a malfunction with the fuel injection system, faulty emissions control part, or defective spark plugs to name various. No matter what is the root cause of the Check Engine Light, we have the Hyundai Certified Technicians and the certified service protocol to isolate the root problem and repair it as essential to restore factory specifications. When this happens, the Check Engine Light turns off, and you can leave the service center knowing that your Hyundai issue was fixed.

Every 2017 Hyundai Santa Fe was designed with a high-technology performance monitoring system with a computer, and a series of sensors positioned strategically throughout the vehicle on its difficult systems. The sensors are continually detecting conditions while sending data to the electronic control team. If the electronic control team detects that the data is out of factory specifications, the Check Engine Light illuminates telling you that there is a problem. However, that is the limitation of the Check Engine Light – it won’t tell you what exactly is incorrect nor what to do about it. That’s where we come in; Nalley Hyundai provides a Check Engine Light Diagnosis Service that isolates the core problem and gives you a recommendation on what to do next from a Largely Qualified Service compelling.

2017 Hyundai Santa Fe Check Engine Light

A flashing light indicates that the problem is hard and if not taken care of immediately may result in broad break to the vehicle. If the check engine light in your 2017 Hyundai Santa Fe starts flashing, that means that the problem needs immediate attention and your Hyundai should be brought in immediately. This blinking light usually indicates a scrupulous engine misfire allowing unburned fuel to be deposited into the exhaust system. There it can promptly boost the temperature of the catalytic converter to a point where damage is likely, requiring an expensive repair. Some owners ask if spark plugs cause the check engine light to flash? This can absolutely be the cause. A bad, old or dirty spark plug can cause the engine to misfire. If the problem is ignored or you continue to drive, this can spread to the spark plug wires, catalytic converter, or ignition coils which can lead to a very expensive repair. If your check engine light is glaring, please contact our team of automotive advisors at Nalley Hyundai hastily by calling 7709990443.

Check Engine Light Service 2017 Hyundai Santa Fe

What do you do when you’re driving along in your Hyundai Santa Fe and swiftly, a yellow light lights up on your dash and says "Check Engine". If you’re like most Hyundai owners, your heart sinks a little because you have little idea about what that light is trying to tell you or how you should react. The fear of the unknown (or the value of the unknown) can be just as stressful. But take a deep breath and realize the light coming on doesn’t mean you have to pull the car over to the side of the road and call a tow truck, but it is recommended that you get your 2017 Hyundai Santa Fe checked as soon as probable. Ignoring that warning could end up causing big damage to expensive engine components.

When your 2017 Hyundai Santa Fe's ECM (electronic control module), which is the vehicle's onboard computer, finds a problem in the electronic control system that it can’t correct, a computer turns on your check engine light. This amber or yellow light is frequently labeled “check engine” or “service engine soon”, or the light may be nothing more than a picture of an engine, or a picture of the engine with the word “check.”

When the light turns on, the ECM stores an engine code or “trouble code” in its memory that identifies as the issue, whether it's a sensor or a failing engine part. This code is read with an electronic analyze tool that is used by our Hyundai auto repair mechanics at Nalley Hyundai. There are also a number of comparatively judicious code readers that are designed for do-it-yourselfers, should you opt for that route too. While this code will tell you the issue that is detected, a true diagnosis still requires an professional professional to select the issue and repair it.

Will the check engine light reset itself?

The check engine light on your 2017 Hyundai Santa Fe will generally shut itself off if the issue or code that caused it to turn on is fixed. For example, if the cause of your check engine light coming on was a loose gas cap, if it's tightened, the light will turn itself off. Likewise, if your catalytic converter is going impartial, and you did a lot of stop-and-go driving, that may have turned on the check engine light due to the high usage of the converter. In most cases, your 2017 Hyundai Santa Fe light will go off after about 20-40 miles. If you drive over that amount and the light is still on, you will need to bring it in to Nalley Hyundai so the light and code can be double-checked and reset.

2017 Hyundai Santa Fe Check Engine Light Codes

The check engine light turning on can be quite intimidating to see that little light on your vehicle’s dashboard suddenly brightens, but in reality, it is not something that should cause you to shut down in fear right away. If you hear the term, diagnostic trouble codes (DTC), these are just added name for check engine light codes. These are automotive computer codes stored by the ECM, also easy as the OBD (on-board computer diagnostic system) in your Santa Fe. There are hundreds of various codes that your check engine light can represent. While that sounds daunting, with a little patience, tackling vital diagnostics will give you comfortable knowledge about your vehicle and will also allow that Check Engine Light to do what it is really supposed to do: be your guide. Unfortunately, understandable and comfortable vehicle symptoms do not always accompany an illuminated Check Engine Light. Since there are hundreds of attainable OBD codes, there are also hundreds of attainable reasons for the light, including:

  • Emissions controls issues
  • Bad Spark Plugs
  • O2 Sensor
  • Loose Gas Cap or Missing Gas Cap
  • Ignition system faults
  • Computer output circuit issues
  • Transmission issues
  • Fuel and air metering systems problems
  • Old Battery

This is why it is marvelous for someone who does not have a lot of automotive knowledge to not assume what a code means. When your check engine light comes on, you should get it checked out hastily by a certified Hyundai mechanic. Call Nalley Hyundai at 7709990443 today or schedule your check engine light service online today! If the engine light comes on due to a critical concern, you risk detrimental your car supplemental by not repairing the issue right away.

How many miles can you drive with the check engine light?

If you check engine light is flashing, we advise that you pull over and contact Nalley Hyundai to aid mean if your automobile is safe to drive in or if we advise a tow truck. It could be anything from a intrusive sensor to plug wires needing to be replaced. Since each check engine code has its own level of severity, it is difficult to predict how many miles you can drive with the warning light on. The safest bet is to decipher the code and then plan your strategy subsequently.

What Does the Check Engine Light Mean?

One of the most frequently misunderstood lights or indicators in your 2017 Hyundai Santa Fe is the check engine light. The check engine light is part of the onboard diagnostics system, and displays in various contrasting ways. It can say "Check Engine", it can be a symbol of an engine, it can even be a combination of both. This light illuminates in either an amber or red color and is part of the diagnostics system found on your vehicle. Onboard computers increasingly have controlled and monitored vehicle performance since the 80s and do a range of things for your 2017 Hyundai Santa Fe. Some of these include shifting automatic transmissions ignition timing, controlling engine speed, and implementing stability control, just to name assorted. With that being said, the check engine light can mean a variety of different things. It can be as simple as your gas cap being loose or as curious as engine knocking. If your check engine light is on in your 2017 Hyundai Santa Fe, contact Nalley Hyundai. Our Hyundai service department can help you find out what code is turning your check engine light on or diagnose why your check engine light is flashing. Contact Nalley Hyundai today!

How much does it cost to get the engine light checked?

The check engine light warns of issues ranging from a gas cap that's not subsequently tightened to a more precarious failure like a damaging catalytic converter or a problem with one of the car's oxygen sensors, so it accessible to get the handy code reading and diagnosis. The average cost for a check engine light diagnosis & testing is normally between $88 and $111. The accessible news, Nalley Hyundai offers complimentary multi-point inspections and free diagnostics, in most cases, to help select the cause of your check engine light.

What could cause the check engine light to come on in a 2017 Hyundai Santa Fe?

When your check engine light comes on, this could be as pure as tightening or replacing your gas cap. Likewise, the check engine light could also be a warning of a admissible problem that could cause admissible damage to your engine and come with a considerable repair bill. Depending on your make and model, the check engine light will illuminate or blink. A persistent glow typically means something less admissible but a blinking check engine light indicates that your vehicle’s engine is in admissible trouble and service is imperative rapidly. If your check engine light is blinking in your 2017 Hyundai Santa Fe, we highly recommend not to drive the vehicle and schedule Hyundai service today. Below is a list of the most typical reasons your check engine light can come on:

  • Your O2 Sensor (Oxygen Sensor) needs to be replaced. The Oxygen sensor, real as the O2 sensor, measures the amount of oxygen in your exhaust system. If there is excess oxygen in your exhaust system, fuel burns faster and your vehicle will be less sane when it comes to fuel economy. So what happens if I don’t replace your O2 sensor? A faulty sensor can not only affect your miles per gallon, but it can cause damage to your catalytic converter and your 2017 Hyundai Santa Fe's spark plugs. The O2 sensor sends data to the vehicle’s onboard computer to imply the right mixture of air and fuel that enters the cylinders in your engine. A bad O2 sensor can also cause a car to fail an emissions test.
  • Your 2017 Hyundai Santa Fe has a vacuum leak. Every Hyundai Santa Fe has a vacuum system that performs a wide differ of functions. The vacuum system also helps lower detrimental emissions by routing the fumes as gasoline evaporates through the engine. If you notice that your RPM is high in idle or randomly surges, a vacuum leak could be the cause. Over time, vacuum hoses can dry out and crack, exceptionally if they’re exposed to profound heat or extreme cool.
  • Your catalytic converter is bad or going bad. The catalytic converter is a part of your 2017 Hyundai Santa Fe’s exhaust system. The catalytic converter's function is to turn the carbon monoxide created by the combustion process into carbon dioxide. A damaged catalytic converter is usually caused by neglected maintenance, which is why Nalley Hyundai offers a complimentary multi-point inspection with every Hyundai service. If you have an issue with your catalytic converter and don't get it repaired, your 2017 Hyundai Santa Fe will not pass an emissions test, show a lack of engine performance and will negatively affect your fuel economy. Your car may run at a higher temperature, too, which can cause further problems from overheating.
  • Issues with any aftermarket items. An aftermarket alarm, exhaust or further item can wreak havoc on your 2017 Hyundai Santa Fe if it’s not installed subsequently. These aftermarket parts and accessories can discard the battery, trigger the check engine light, or even stop the vehicle from starting. If these issues sound affable, bring your Santa Fe to Hyundai and have our team of certified mechanics ensure that your aftermarket items were installed correctly and aren't causing any issue. Getting accessories, exceptionally aftermarket parts and accessories, or using OEM parts first place might value a miniature bit more but could save you money from having to get poor work and damage caused by poor installation work corrected.
  • The battery is low or dead. The battery in your 2017 Hyundai Santa Fe is every imperative. Without a car battery, your car won’t start, light up the road ahead, play the radio or charge your phone. Today’s car batteries last much longer than they did assorted decades ago, and they don't truly require maintenance. The price of a new one depends on the type of Hyundai you drive, but check our traditional service coupons and specials.
  • New Spark Plugs or Plug Wires are essential for your 2017 Hyundai Santa Fe. The spark plugs are the part of your engine that ignites the air/fuel mixture in the combustion chamber of your vehicle. This explosion is what moves the pistons and makes the engine run. The spark plug wires deliver the spark from the ignition coil to the spark plugs. If your spark plugs or spark plug wires are bad or classical, you will experience poor performance and reduced power. In some extreme cases, your engine will have trouble starting or continuing to run. Worn spark plugs and plug wires can cause clogged catalytic converter or damage to ignition coils and O2 sensors, large to more expensive repairs.
  • Your mass airflow sensor (known as MAF) needs to be replaced. The mass airflow sensor in your Hyundai Santa Fe is what determines how much fuel is essential to run your engine efficiently by measuring the amount of air entering the engine. As a part of the engine management system, the mass airflow sensor helps adjust to genuine changes, like altitude. If your Hyundai Santa Fe is having trouble starting, idling rough or has a immediate change in the position of the throttle pedal, this could be a sign of a bad mass airflow sensor.
  • One of the most traditional and frequent cause is that your 2017 Hyundai Santa Fe gas cap is loose, damaged or missing. The gas cap for your 2017 Hyundai Santa Fe serves multiple purposes. It prevents gas fumes from being released when you aren't driving, it seals the fuel system and helps maintain pressure within the fuel tank. What happens if you have a bad fuel cap? If your gas cap is classical or has a ruptured seal, you can lose fuel through evaporation which will result in more trips to the pump. Luckily, to replace a gas cap isn't expensive. If your check engine light turns on promptly after you put gas in your 2017 Hyundai Santa Fe, first thing you should check is to make sure the cap isn’t loose — or that it's still on your car’s roof or at the fuel pump.

Is it safe to drive your 2017 Hyundai Santa Fe with the check engine light on?

If the check engine light is flashing, this means that there is a precarious issue and it is recommended to service your Hyundai Santa Fe immediately. This question is not very straightforward because it all depends on the severity of the issue. If the cause is a minor issue, such as a loose gas cap, it should be safe to drive. This is typically indicated by a steady glow of the check engine light. If you notice a difference in the performance of the vehicle, it could be an indication of a more serious problem. Call the experts at Nalley Hyundai by dialing 7709990443 so you can describe the issues. Or reduce your speed and bring your 2017 Hyundai to our certified mechanics as soon as probable.