Please wait while the page loads...

Will the check engine light reset itself?

The check engine light on your 2016 Hyundai Elantra will usually shut itself off if the issue or code that caused it to turn on is fixed. For example, if the cause of your check engine light coming on was a loose gas cap, if it's tightened, the light will turn itself off. Likewise, if your catalytic converter is going factual, and you did various of stop-and-go driving, that may have turned on the check engine light due to the high usage of the converter. In most cases, your 2016 Hyundai Elantra light will go off after about 20-40 miles. If you drive over that amount and the light is still on, you will need to bring it in to Nalley Hyundai so the light and code can be double-checked and reset.

How much does it cost to get the engine light checked?

The average cost for a check engine light diagnosis & testing is usually between $88 and $111. The satisfying news, Nalley Hyundai offers complimentary multi-point inspections and free diagnostics, in most cases, to help determine the cause of your check engine light. The check engine light warns of issues ranging from a gas cap that's not perfectly tightened to a more dangerous failure like a bad catalytic converter or a problem with one of the car's oxygen sensors, so it satisfying to get the normal code reading and diagnosis.

2016 Hyundai Elantra Check Engine Light

If the check engine light in your 2016 Hyundai Elantra starts flashing, that means that the problem needs immediate attention and your Hyundai should be brought in quickly. A flashing light expresses that the problem is active and if not taken care of quickly may result in colossal damage to the automobile. This twinkling light ordinarily indicates a strict engine misfire allowing unburned fuel to be dumped into the exhaust system. There it can hastily increase the temperature of the catalytic converter to a point where wear and tear is achievable, requiring an fancy repair. Some owners ask if spark plugs cause the check engine light to flash? This can totally be the cause. A contentious, common or dirty spark plug can cause the engine to misfire. If your check engine light is glaring, please contact our team of automotive experts at Nalley Hyundai abruptly by calling 7709990443. If the problem is ignored or you continue to drive, this can spread to the spark plug wires, catalytic converter, or ignition coils which can lead to a very expensive repair.

Is it safe to drive your 2016 Hyundai Elantra with the check engine light on?

If the check engine light is flashing, this means that there is a relentless issue and it is recommended to service your Hyundai Elantra immediately. This question is not extraordinarily accepted because it all depends on the severity of the issue. If the cause is a minor issue, such as a loose gas cap, it should be safe to travel to work. This is generally indicated by a consistent glow of the check engine light. If you notice a difference in the performance of the vehicle, it could be an indication of a more exacting problem. Call the consultants at Nalley Hyundai by dialing 7709990443 so you can describe the issues. Or lessen your speed and bring your 2016 Hyundai to our certified mechanics as soon as careful.

What could cause the check engine light to come on in a 2016 Hyundai Elantra?

When your check engine light comes on, this could be as prevailing as tightening or replacing your gas cap. Likewise, the check engine light could also be a warning of a hazardous problem that could cause hazardous damage to your engine and come with a large repair bill. Depending on your make and model, the check engine light will illuminate or blink. A persistent glow commonly means something less hazardous but a flashing check engine light expresses that your vehicle’s engine is in hazardous trouble and service is paramount abruptly. If your check engine light is flashing in your 2016 Hyundai Elantra, we extraordinarily recommend not to travel to work the vehicle and schedule Hyundai service abruptly. Below is a list of the most normal reasons your check engine light can come on:

  • The battery is low or dead. The battery in your 2016 Hyundai Elantra is every main. Without a car battery, your car won’t start, light up the road ahead, play the radio or charge your phone. Today’s car batteries last much longer than they did copious decades ago, and they don't really require maintenance. The price of a new one depends on the type of Hyundai you travel to work, but check our present service coupons and specials.
  • Your catalytic converter is bad or going bad. The catalytic converter is a part of your 2016 Hyundai Elantra’s exhaust system. The catalytic converter's function is to turn the carbon monoxide created by the combustion process into carbon dioxide. A damaged catalytic converter is usually caused by neglected maintenance, which is why Nalley Hyundai offers a complimentary multi-point inspection with every Hyundai service. If you have an issue with your catalytic converter and don't get it revamped, your 2016 Hyundai Elantra will not pass an emissions test, show a lack of engine performance and will negatively affect your fuel economy. Your car may run at a higher temperature, too, which can cause added problems from overheating.
  • Your O2 Sensor (Oxygen Sensor) needs to be replaced. The Oxygen sensor, known as the O2 sensor, measures the amount of oxygen in your exhaust system. If there is excess oxygen in your exhaust system, fuel burns faster and your vehicle will be less achievable when it comes to fuel economy. So what happens if I don’t replace your O2 sensor? A faulty sensor can not only affect your miles per gallon, but it can cause damage to your catalytic converter and your 2016 Hyundai Elantra's spark plugs. The O2 sensor sends data to the vehicle’s onboard computer to find out the right mixture of air and fuel that enters the cylinders in your engine. A bad O2 sensor can also cause a car to fail an emissions test.
  • One of the most normal and frequent cause is that your 2016 Hyundai Elantra gas cap is loose, damaged or missing. The gas cap for your 2016 Hyundai Elantra serves multiple purposes. It prevents gas fumes from being released when you aren't driving, it seals the fuel system and helps maintain pressure within the fuel tank. What happens if you have a bad fuel cap? If your gas cap is old or has a ruptured seal, you can lose fuel through evaporation which will result in more trips to the pump. Luckily, to replace a gas cap isn't expensive. If your check engine light turns on immediately after you put gas in your 2016 Hyundai Elantra, first thing you should check is to make confident the cap isn’t loose — or that it's still on your car’s roof or at the fuel pump.
  • Your mass airflow sensor (known as MAF) needs to be replaced. The mass airflow sensor in your Hyundai Elantra is what determines how much fuel is essential to run your engine efficiently by measuring the amount of air entering the engine. As a part of the engine management system, the mass airflow sensor helps adjust to certain changes, like altitude. If your Hyundai Elantra is having trouble starting, idling rough or has a abrupt change in the position of the throttle pedal, this could be a sign of a bad mass airflow sensor.
  • Your 2016 Hyundai Elantra has a vacuum leak. Every Hyundai Elantra has a vacuum system that performs a wide collection of functions. The vacuum system also helps decrease bad emissions by routing the fumes as gasoline evaporates through the engine. If you notice that your RPM is high in idle or randomly surges, a vacuum leak could be the cause. Over time, vacuum hoses can barren out and crack, especially if they’re exposed to active heat or extreme brisk.
  • Issues with any aftermarket items. An aftermarket alarm, exhaust or added item can wreak havoc on your 2016 Hyundai Elantra if it’s not installed appropriately. These aftermarket parts and accessories can discard the battery, trigger the check engine light, or even prevent the vehicle from starting. If these issues sound favorite, bring your Elantra to Hyundai and have our team of certified mechanics ensure that your aftermarket items were installed appropriately and aren't causing any issue. Getting accessories, especially aftermarket parts and accessories, or using OEM parts first place might cost a little bit more but could save you money from having to get meager work and damage caused by meager installation work corrected.
  • New Spark Plugs or Plug Wires are essential for your 2016 Hyundai Elantra. The spark plugs are the part of your engine that ignites the air/fuel mixture in the combustion chamber of your vehicle. This explosion is what moves the pistons and makes the engine run. The spark plug wires bring the spark from the ignition coil to the spark plugs. If your spark plugs or spark plug wires are bad or old, you will experience meager performance and reduced power. In some extreme cases, your engine will have trouble starting or continuing to run. Worn spark plugs and plug wires can cause clogged catalytic converter or damage to ignition coils and O2 sensors, considerable to more expensive repairs.

2016 Hyundai Elantra Check Engine Light Flashing

Although there are plentiful feasible causes of an illuminated Check Engine Light, we know from years of providing Check Engine Light Diagnosis Service that there are a lot daily causes including something as easy as a loose gas cap. Further daily reasons for a Check Engine Light are faulty head gasket, a malfunction with the fuel injection system, damaged oxygen sensor, faulty emissions control part, dirty mass airflow sensor, or defective spark plugs to name various. No matter what is the root cause of the Check Engine Light, we have the Hyundai Certified Technicians and the certified service protocol to isolate the root problem and repair it as needed to restore factory specifications. When this happens, the Check Engine Light turns off, and you can leave the service center knowing that your Hyundai issue was fixed.

Every 2016 Hyundai Elantra was designed with a high-technology performance monitoring system with a computer, and a series of sensors positioned strategically throughout the vehicle on its hard systems. The sensors are continually detecting conditions while sending data to the electronic control unit. If the electronic control unit detects that the data is out of factory specifications, the Check Engine Light illuminates telling you that there is a problem. However, that is the limitation of the Check Engine Light – it won’t tell you what exactly is mistaken nor what to do about it. That’s where we come in; Nalley Hyundai provides a Check Engine Light Diagnosis Service that isolates the core problem and gives you a recommendation on what to do next from a Extraordinarily Qualified Service compelling.

2016 Hyundai Elantra Check Engine Light Codes

The check engine light turning on can be quite intimidating to see that miniature light on your vehicle’s dashboard suddenly flashes, but in reality, it is not something that should cause you to shut down in fear right away. If you hear the term, diagnostic trouble codes (DTC), these are just another name for check engine light codes. These are automotive computer codes stored by the ECM, also accepted as the OBD (on-board computer diagnostic system) in your Elantra. There are hundreds of back-up codes that your check engine light can represent. While that sounds daunting, with a miniature patience, tackling basic diagnostics will give you helpful knowledge about your automobile and will also allow that Check Engine Light to do what it is genuinely supposed to do: be your guide. Unfortunately, discernible and helpful automobile symptoms do not always accompany an illuminated Check Engine Light. Since there are hundreds of attainable OBD codes, there are also hundreds of attainable reasons for the light, including:

  • Emissions controls issues
  • Ignition system faults
  • Transmission issues
  • O2 Sensor
  • Old Battery
  • Computer output circuit issues
  • Loose Gas Cap or Missing Gas Cap
  • Bad Spark Plugs
  • Fuel and air metering systems problems

This is why it is vital for someone who does not have a lot of automotive knowledge to not assume what a code means. When your check engine light comes on, you should get it checked out quickly by a certified Hyundai mechanic. Call Nalley Hyundai at 7709990443 today or schedule your check engine light service online today! If the engine light comes on due to a scrupulous concern, you risk serious your car further by not repairing the issue right away.

Check Engine Light Service 2016 Hyundai Elantra

What do you do when you’re driving along in your Hyundai Elantra and suddenly, a yellow light lights up on your dash and says "Check Engine". If you’re like most Hyundai owners, your heart sinks a tiny because you have tiny idea about what that light is trying to tell you or how you should react. The fear of the unknown (or the estimate of the unknown) can be just as stressful. But take a deep breath and realize the light coming on doesn’t mean you have to pull the car over to the side of the road and call a tow truck, but it is recommended that you get your 2016 Hyundai Elantra checked as soon as possible. Ignoring that warning could end up causing main damage to expensive engine components.

When your 2016 Hyundai Elantra's ECM (electronic control module), which is the vehicle's onboard computer, finds a problem in the electronic control system that it can’t respectable, a computer turns on your check engine light. This amber or yellow light is normally labeled “check engine” or “service engine soon”, or the light may be nothing more than a picture of an engine, or a picture of the engine with the word “check.”

When the light turns on, the ECM stores an engine code or “trouble code” in its memory that identifies as the issue, whether it's a sensor or a failing engine part. This code is read with an electronic analyze tool that is used by our Hyundai auto repair mechanics at Nalley Hyundai. There are also a number of rather bargain code readers that are designed for do-it-yourselfers, should you determine that route too. While this code will tell you the issue that is detected, a true diagnosis still requires an experienced experienced to determine the issue and repair it.

What Does the Check Engine Light Mean?

One of the most mostly misunderstood lights or indicators in your 2016 Hyundai Elantra is the check engine light. The check engine light is part of the onboard diagnostics system, and displays in a few assorted ways. It can say "Check Engine", it can be a symbol of an engine, it can even be a combination of both. This light illuminates in either an amber or red color and is part of the diagnostics system found on your vehicle. Onboard computers increasingly have controlled and monitored vehicle performance since the 80s and do a variety of things for your 2016 Hyundai Elantra. Some of these include ignition timing, shifting automatic transmissions controlling engine speed, and implementing stability control, just to name various. With that being said, the check engine light can mean a variety of various things. It can be as simple as your gas cap being loose or as competent as engine knocking. If your check engine light is on in your 2016 Hyundai Elantra, contact Nalley Hyundai. Our Hyundai service department can help you find out what code is turning your check engine light on or investigate why your check engine light is shining. Contact Nalley Hyundai today!

How many miles can you drive with the check engine light?

The safest bet is to decipher the code and then plan your strategy accordingly. Since each check engine code has its own level of severity, it is difficult to predict how copious miles you can drive with the warning light on. It could be anything from a bad sensor to plug wires needing to be replaced. If you check engine light is flashing, we advocate that you pull over and contact Nalley Hyundai to help determine if your vehicle is protected to drive in or if we advocate a tow truck.