Please wait while the page loads...

2013 Hyundai Tucson Check Engine Light

If the check engine light in your 2013 Hyundai Tucson starts flashing, that means that the problem needs immediate attention and your Hyundai should be brought in instantly. A flashing light expresses that the problem is adequate and if not taken care of instantly may result in enormous break to the vehicle. This blinking light generally suggests a relentless engine misfire allowing unburned fuel to be discharged into the exhaust system. There it can immediately raise the temperature of the catalytic converter to a point where damage is likely, requiring an costly repair. Some owners ask if spark plugs cause the check engine light to flash? This can absolutely be the cause. A damaging, old or dirty spark plug can cause the engine to misfire. If your check engine light is flashing, please contact our team of automotive advisors at Nalley Hyundai immediately by calling 7709990443. If the problem is ignored or you continue to drive, this can spread to the spark plug wires, catalytic converter, or ignition coils which can lead to a very expensive repair.

What Does the Check Engine Light Mean?

One of the most frequently misunderstood lights or indicators in your 2013 Hyundai Tucson is the check engine light. The check engine light is part of the onboard diagnostics system, and displays in a few back-up ways. It can say "Check Engine", it can be a symbol of an engine, it can even be a combination of both. This light brightens in either an amber or red color and is part of the diagnostics system found on your vehicle. Onboard computers increasingly have controlled and monitored vehicle performance since the 80s and do a variety of things for your 2013 Hyundai Tucson. Some of these include ignition timing, controlling engine speed, shifting automatic transmissions and implementing stability control, just to name a few. With that being said, the check engine light can mean a variety of alternative things. It can be as simple as your gas cap being loose or as risky as engine knocking. If your check engine light is on in your 2013 Hyundai Tucson, contact Nalley Hyundai. Contact Nalley Hyundai today! Our Hyundai service department can help you find out what code is turning your check engine light on or diagnose why your check engine light is flashing.

2013 Hyundai Tucson Check Engine Light Flashing

Although there are countless feasible causes of an illuminated Check Engine Light, we know from years of providing Check Engine Light Diagnosis Service that there are countless commonplace causes including something as plain as a loose gas cap. Alternative commonplace reasons for a Check Engine Light are faulty emissions control part, faulty head gasket, a malfunction with the fuel injection system, damaged oxygen sensor, dirty mass airflow sensor, or defective spark plugs to name bountiful. No matter what is the root cause of the Check Engine Light, we have the Hyundai Certified Technicians and the certified service protocol to isolate the root problem and repair it as needed to restore factory specifications. When this happens, the Check Engine Light turns off, and you can leave the service center knowing that your Hyundai issue was fixed.

Every 2013 Hyundai Tucson was designed with a high-technology performance monitoring system with a computer, and a series of sensors positioned strategically throughout the vehicle on its difficult systems. The sensors are continually detecting conditions while sending data to the computerized control unit. If the computerized control unit detects that the data is out of factory specifications, the Check Engine Light brightens telling you that there is a problem. However, that is the limitation of the Check Engine Light – it won’t tell you what totally is wrong nor what to do about it. That’s where we come in; Nalley Hyundai provides a Check Engine Light Diagnosis Service that isolates the core problem and gives you a recommendation on what to do next from a Extraordinarily Qualified Service technological.

Check Engine Light Service 2013 Hyundai Tucson

What do you do when you’re driving along in your Hyundai Tucson and suddenly, a yellow light illuminates on your dash and says "Check Engine". If you’re like most Hyundai owners, your heart sinks a little because you have little idea about what that light is trying to tell you or how you should react. The fear of the unknown (or the estimate of the unknown) can be just as stressful. But take a deep breath and realize the light coming on doesn’t mean you have to pull the car over to the side of the road and call a tow truck, but it is recommended that you get your 2013 Hyundai Tucson checked as soon as available. Ignoring that warning could end up causing big damage to expensive engine components.

When your 2013 Hyundai Tucson's ECM (electronic control module), which is the vehicle's onboard computer, finds a problem in the computerized control system that it can’t honest, a computer turns on your check engine light. This amber or yellow light is normally labeled “check engine” or “service engine soon”, or the light may be nothing more than a picture of an engine, or a picture of the engine with the word “check.”

When the light turns on, the ECM stores an engine code or “trouble code” in its memory that identifies as the issue, whether it's a sensor or a failing engine part. This code is read with an electronic scan tool that is used by our Hyundai auto repair mechanics at Nalley Hyundai. There are also a number of comparatively low-cost code readers that are designed for do-it-yourselfers, should you choose that route too. While this code will tell you the issue that is detected, a true diagnosis still requires an skilled professional to choose the issue and repair it.

Is it safe to drive your 2013 Hyundai Tucson with the check engine light on?

If the check engine light is flashing, this means that there is a critical issue and it is recommended to service your Hyundai Tucson today. This question is not exceedingly pure because it all depends on the severity of the issue. If the cause is a minor issue, such as a loose gas cap, it should be dependable to drive. This is normally indicated by a steady glow of the check engine light. If you notice a difference in the performance of the vehicle, it could be an indication of a more necessary problem. Call the consultants at Nalley Hyundai by dialing 7709990443 so you can describe the issues. Or discount your speed and bring your 2013 Hyundai to our certified mechanics as soon as feasible.

How many miles can you drive with the check engine light?

The safest bet is to decipher the code and then plan your strategy accordingly. It could be anything from a bad sensor to plug wires needing to be replaced. If you check engine light is flashing, we advocate that you pull over and contact Nalley Hyundai to help mean if your vehicle is safe to travel to work in or if we advocate a tow truck. Since each check engine code has its own level of severity, it is difficult to predict how many miles you can travel to work with the warning light on.

What could cause the check engine light to come on in a 2013 Hyundai Tucson?

When your check engine light comes on, this could be as authentic as tightening or replacing your gas cap. Likewise, the check engine light could also be a warning of a serious problem that could cause serious damage to your engine and come with a massive repair bill. Depending on your make and model, the check engine light will illuminate or blink. A ordinary glow frequently means something less serious but a flashing check engine light indicates that your vehicle’s engine is in serious trouble and service is basic instantly. If your check engine light is flashing in your 2013 Hyundai Tucson, we excessively recommend not to drive the vehicle and schedule Hyundai service today. Below is a list of the most classic reasons your check engine light can come on:

  • One of the most constitutional and bountiful cause is that your 2013 Hyundai Tucson gas cap is loose, damaged or missing. The gas cap for your 2013 Hyundai Tucson serves multiple purposes. It prevents gas fumes from being released when you aren't driving, it seals the fuel system and helps maintain pressure within the fuel tank. What happens if you have a destructive fuel cap? If your gas cap is common or has a ruptured seal, you can lose fuel through evaporation which will result in more trips to the pump. Luckily, to replace a gas cap isn't expensive. If your check engine light turns on rapidly after you put gas in your 2013 Hyundai Tucson, authentic thing you should check is to make hopeful the cap isn’t loose — or that it's still on your car’s roof or at the fuel pump.
  • Your mass airflow sensor (known as MAF) needs to be replaced. The mass airflow sensor in your Hyundai Tucson is what determines how much fuel is needed to run your engine efficiently by measuring the amount of air entering the engine. As a part of the engine management system, the mass airflow sensor helps adjust to actual changes, like altitude. If your Hyundai Tucson is having trouble starting, idling rough or has a sudden change in the position of the throttle pedal, this could be a sign of a destructive mass airflow sensor.
  • The battery is low or dead. The battery in your 2013 Hyundai Tucson is every abundant. Without a car battery, your car won’t start, light up the road ahead, play the radio or charge your phone. Today’s car batteries last much longer than they did a few decades ago, and they don't really require maintenance. The price of a new one depends on the type of Hyundai you travel to work, but check our existing service coupons and specials.
  • Your catalytic converter is destructive or going destructive. The catalytic converter is a part of your 2013 Hyundai Tucson’s exhaust system. The catalytic converter's function is to turn the carbon monoxide created by the combustion process into carbon dioxide. A damaged catalytic converter is usually caused by neglected maintenance, which is why Nalley Hyundai offers a complimentary multi-point inspection with every Hyundai service. If you have an issue with your catalytic converter and don't get it fixed, your 2013 Hyundai Tucson will not pass an emissions test, show a lack of engine performance and will negatively affect your fuel economy. Your car may run at a higher temperature, too, which can cause diverse problems from overheating.
  • Issues with all aftermarket items. An aftermarket alarm, exhaust or diverse item can wreak havoc on your 2013 Hyundai Tucson if it’s not installed accurately. These aftermarket parts and accessories can deposit the battery, trigger the check engine light, or even impede the vehicle from starting. If these issues sound commonplace, bring your Tucson to Hyundai and have our team of certified mechanics ensure that your aftermarket items were installed accurately and aren't causing all issue. Getting accessories, immensely aftermarket parts and accessories, or using OEM parts authentic place might cost a tiny bit more but could save you money from having to get poor work and damage caused by poor installation work corrected.
  • Your O2 Sensor (Oxygen Sensor) needs to be replaced. The Oxygen sensor, known as the O2 sensor, measures the amount of oxygen in your exhaust system. If there is excess oxygen in your exhaust system, fuel burns faster and your vehicle will be less helpful when it comes to fuel economy. So what happens if I don’t replace your O2 sensor? A faulty sensor can not only affect your miles per gallon, but it can cause damage to your catalytic converter and your 2013 Hyundai Tucson's spark plugs. The O2 sensor sends data to the vehicle’s onboard computer to indicate the right collection of air and fuel that enters the cylinders in your engine. A destructive O2 sensor can also cause a car to fail an emissions test.
  • New Spark Plugs or Plug Wires are needed for your 2013 Hyundai Tucson. The spark plugs are the part of your engine that ignites the air/fuel collection in the combustion chamber of your vehicle. This explosion is what moves the pistons and makes the engine run. The spark plug wires transport the spark from the ignition coil to the spark plugs. If your spark plugs or spark plug wires are destructive or common, you will experience poor performance and reduced power. In some extreme cases, your engine will have trouble starting or continuing to run. Worn spark plugs and plug wires can cause clogged catalytic converter or damage to ignition coils and O2 sensors, dominant to more expensive repairs.
  • Your 2013 Hyundai Tucson has a vacuum leak. Every Hyundai Tucson has a vacuum system that performs a wide collection of functions. The vacuum system also helps lower harmful emissions by routing the fumes as gasoline evaporates through the engine. If you notice that your RPM is high in idle or randomly surges, a vacuum leak could be the cause. Over time, vacuum hoses can dry out and crack, immensely if they’re exposed to intense heat or extreme cold.

Will the check engine light reset itself?

The check engine light on your 2013 Hyundai Tucson will usually shut itself off if the issue or code that caused it to turn on is repaired. For example, if the cause of your check engine light coming on was a loose gas cap, if it's tightened, the light will turn itself off. Likewise, if your catalytic converter is going functional, and you did a lot of stop-and-go driving, that may have turned on the check engine light due to the high usage of the converter. In most cases, your 2013 Hyundai Tucson light will go off after about 20-40 miles. If you drive over that fee and the light is still on, you will need to bring it in to Nalley Hyundai so the light and code can be double-checked and reset.

2013 Hyundai Tucson Check Engine Light Codes

The check engine light turning on can be quite intimidating to see that little light on your vehicle’s dashboard suddenly illuminates, but in reality, it is not something that should cause you to shut down in fear right away. If you hear the term, diagnostic trouble codes (DTC), these are just another name for check engine light codes. These are automotive computer codes stored by the ECM, also known as the OBD (on-board computer diagnostic system) in your Tucson. There are hundreds of imposing codes that your check engine light can represent. While that sounds daunting, with a little patience, tackling imposing diagnostics will give you practical knowledge about your vehicle and will also allow that Check Engine Light to do what it is specifically supposed to do: be your guide. Unfortunately, accessible and practical vehicle symptoms do not always accompany an illuminated Check Engine Light. Since there are hundreds of available OBD codes, there are also hundreds of available reasons for the light, including:

  • Emissions controls issues
  • Old Battery
  • Transmission issues
  • Computer output circuit issues
  • Fuel and air metering systems problems
  • O2 Sensor
  • Loose Gas Cap or Missing Gas Cap
  • Bad Spark Plugs
  • Ignition system faults

This is why it is central for someone who does not have a lot of automotive knowledge to not assume what a code means. Call Nalley Hyundai at 7709990443 promptly or schedule your check engine light service online today! If the engine light comes on due to a alarming concern, you risk damaging your car added by not repairing the issue right away. When your check engine light comes on, you should get it checked out quickly by a certified Hyundai mechanic.

How much does it cost to get the engine light checked?

The average estimate for a check engine light diagnosis & testing is frequently between $88 and $111. The confident news, Nalley Hyundai offers complimentary multi-point inspections and free diagnostics, in most cases, to assist imply the cause of your check engine light. The check engine light warns of issues ranging from a gas cap that's not well tightened to a more effective failure like a destructive catalytic converter or a problem with one of the car's oxygen sensors, so it confident to get the feasible code reading and diagnosis.