Please wait while the page loads...

Is it safe to drive your 2013 Hyundai Santa Fe with the check engine light on?

If the check engine light is flashing, this means that there is a hazardous issue and it is recommended to service your Hyundai Santa Fe immediately. This question is not very normal because it all depends on the severity of the issue. If the cause is a minor issue, such as a loose gas cap, it should be safe to drive. This is frequently indicated by a steady glow of the check engine light. If you notice a difference in the performance of the vehicle, it could be an indication of a more alarming problem. Call the experts at Nalley Hyundai by dialing 7709990443 so you can describe the issues. Or lessen your speed and bring your 2013 Hyundai to our certified mechanics as soon as possible.

Check Engine Light Service 2013 Hyundai Santa Fe

What do you do when you’re driving along in your Hyundai Santa Fe and suddenly, a yellow light illuminates on your dash and says "Check Engine". If you’re like most Hyundai owners, your heart sinks a small because you have small idea about what that light is trying to tell you or how you should react. The fear of the unknown (or the cost of the unknown) can be just as stressful. But take a deep breath and realize the light coming on doesn’t imply you have to pull the car over to the side of the road and call a tow truck, but it is recommended that you get your 2013 Hyundai Santa Fe checked as soon as achievable. Ignoring that warning could end up causing big damage to expensive engine parts.

When your 2013 Hyundai Santa Fe's ECM (electronic control module), which is the vehicle's onboard computer, finds a problem in the electrical control system that it can’t honest, a computer turns on your check engine light. This amber or yellow light is frequently labeled “check engine” or “service engine soon”, or the light may be nothing more than a picture of an engine, or a picture of the engine with the word “check.”

When the light turns on, the ECM stores an engine code or “trouble code” in its memory that identifies as the issue, whether it's a sensor or a failing engine part. This code is read with an electronic inspect tool that is used by our Hyundai auto repair mechanics at Nalley Hyundai. There are also a number of relatively inexpensive code readers that are designed for do-it-yourselfers, should you choose that route too. While this code will tell you the issue that is detected, a true diagnosis still requires an professional mechanical to designate the issue and repair it.

What Does the Check Engine Light Mean?

One of the most frequently misunderstood lights or indicators in your 2013 Hyundai Santa Fe is the check engine light. The check engine light is part of the onboard diagnostics system, and displays in plentiful different ways. It can say "Check Engine", it can be a symbol of an engine, it can even be a combination of both. This light illuminates in either an amber or red color and is part of the diagnostics system found on your vehicle. Onboard computers increasingly have controlled and monitored vehicle performance since the 80s and do a variety of things for your 2013 Hyundai Santa Fe. Some of these include ignition timing, controlling engine speed, shifting automatic transmissions and implementing stability control, just to name a few. With that being said, the check engine light can represent a variety of discrete things. It can be as uncomplicated as your gas cap being loose or as unhealthy as engine knocking. If your check engine light is on in your 2013 Hyundai Santa Fe, contact Nalley Hyundai. Contact Nalley Hyundai today! Our Hyundai service department can help you find out what code is turning your check engine light on or scan why your check engine light is shining.

2013 Hyundai Santa Fe Check Engine Light Codes

The check engine light turning on can be quite intimidating to see that little light on your vehicle’s dashboard expeditiously illuminates, but in reality, it is not something that should cause you to shut down in fear right away. If you hear the term, diagnostic trouble codes (DTC), these are just another name for check engine light codes. These are automotive computer codes stored by the ECM, also prevalent as the OBD (on-board computer diagnostic system) in your Santa Fe. There are hundreds of exact codes that your check engine light can indicate. While that sounds daunting, with a little patience, tackling crucial diagnostics will give you accessible knowledge about your vehicle and will also allow that Check Engine Light to do what it is really supposed to do: be your guide. Regrettably, exact and suitable vehicle symptoms do not always accompany an illuminated Check Engine Light. Since there are hundreds of conceivable OBD codes, there are also hundreds of conceivable reasons for the light, including:

  • Transmission issues
  • O2 Sensor
  • Loose Gas Cap or Missing Gas Cap
  • Ignition system faults
  • Bad Spark Plugs
  • Fuel and air metering systems problems
  • Emissions controls issues
  • Computer output circuit issues
  • Old Battery

This is why it is difficult for someone who does not have various of automotive knowledge to not assume what a code means. If the engine light comes on due to a relentless concern, you risk damaging your car further by not repairing the issue right away. Call Nalley Hyundai at 7709990443 today or schedule your check engine light service online today! When your check engine light comes on, you should get it checked out quickly by a certified Hyundai mechanic.

2013 Hyundai Santa Fe Check Engine Light

If the check engine light in your 2013 Hyundai Santa Fe starts twinkling, that means that the problem needs immediate attention and your Hyundai should be brought in quickly. A twinkling light indicates that the problem is miraculous and if not taken care of quickly may result in major damage to the vehicle. This twinkling light usually indicates a rigid engine misfire allowing unburned fuel to be dumped into the exhaust system. There it can immediately expand the temperature of the catalytic converter to a point where damage is viable, requiring an expensive repair. Some owners ask if spark plugs cause the check engine light to flash? This can specifically be the cause. A damaging, erstwhile or dirty spark plug can cause the engine to misfire. If your check engine light is twinkling, please contact our team of automotive consultants at Nalley Hyundai immediately by calling 7709990443. If the problem is ignored or you continue to travel to work, this can spread to the spark plug wires, catalytic converter, or ignition coils which can lead to a very expensive repair.

What could cause the check engine light to come on in a 2013 Hyundai Santa Fe?

When your check engine light comes on, this could be as understandable as tightening or replacing your gas cap. Likewise, the check engine light could also be a warning of a treacherous problem that could cause treacherous damage to your engine and come with a leading repair bill. Depending on your make and model, the check engine light will illuminate or blink. A steady glow mostly means something less treacherous but a flashing check engine light implies that your vehicle’s engine is in treacherous trouble and service is crucial urgently. If your check engine light is flashing in your 2013 Hyundai Santa Fe, we highly recommend not to drive the vehicle and schedule Hyundai service at this moment. Below is a list of the most cordial reasons your check engine light can come on:

  • The battery is low or dead. The battery in your 2013 Hyundai Santa Fe is each acceptable. Without a car battery, your car won’t start, light up the road ahead, play the radio or charge your phone. Today’s car batteries last much longer than they did a few decades ago, and they don't certainly require maintenance. The price of a new one depends on the type of Hyundai you drive, but check our modern service coupons and specials.
  • One of the most commonplace and frequent cause is that your 2013 Hyundai Santa Fe gas cap is loose, damaged or missing. The gas cap for your 2013 Hyundai Santa Fe serves multiple purposes. It prevents gas fumes from being released when you aren't driving, it seals the fuel system and helps maintain pressure within the fuel tank. What happens if you have a contentious fuel cap? If your gas cap is old or has a ruptured seal, you can lose fuel through evaporation which will result in more trips to the pump. Luckily, to replace a gas cap isn't expensive. If your check engine light turns on instantly after you put gas in your 2013 Hyundai Santa Fe, earliest thing you should check is to make hopeful the cap isn’t loose — or that it's still on your car’s roof or at the fuel pump.
  • New Spark Plugs or Plug Wires are necessary for your 2013 Hyundai Santa Fe. The spark plugs are the part of your engine that ignites the air/fuel assortment in the combustion chamber of your vehicle. This explosion is what moves the pistons and makes the engine run. The spark plug wires deliver the spark from the ignition coil to the spark plugs. If your spark plugs or spark plug wires are contentious or old, you will experience poor performance and reduced power. In some extreme cases, your engine will have trouble starting or continuing to run. Worn spark plugs and plug wires can cause clogged catalytic converter or damage to ignition coils and O2 sensors, first-rate to more expensive repairs.
  • Your O2 Sensor (Oxygen Sensor) needs to be replaced. The Oxygen sensor, known as the O2 sensor, measures the amount of oxygen in your exhaust system. If there is excess oxygen in your exhaust system, fuel burns faster and your vehicle will be less correct when it comes to fuel economy. So what happens if I don’t replace your O2 sensor? A faulty sensor can not only affect your miles per gallon, but it can cause damage to your catalytic converter and your 2013 Hyundai Santa Fe's spark plugs. The O2 sensor sends data to the vehicle’s onboard computer to suggest the right assortment of air and fuel that enters the cylinders in your engine. A contentious O2 sensor can also cause a car to fail an emissions test.
  • Issues with any aftermarket items. An aftermarket alarm, exhaust or alternative item can wreak havoc on your 2013 Hyundai Santa Fe if it’s not installed accurately. These aftermarket parts and accessories can drain the battery, trigger the check engine light, or even prevent the vehicle from starting. If these issues sound current, bring your Santa Fe to Hyundai and have our company of certified mechanics ensure that your aftermarket items were installed correctly and aren't causing any issue. Getting accessories, especially aftermarket parts and accessories, or using OEM parts earliest place might cost a tiny bit more but could save you money from having to get poor work and damage caused by poor installation work corrected.
  • Your 2013 Hyundai Santa Fe has a vacuum leak. Each Hyundai Santa Fe has a vacuum system that performs a wide variety of functions. The vacuum system also helps cut detrimental emissions by routing the fumes as gasoline evaporates through the engine. If you notice that your RPM is high in idle or randomly surges, a vacuum leak could be the cause. Over time, vacuum hoses can dry out and crack, especially if they’re exposed to dynamic heat or extreme chilly.
  • Your catalytic converter is contentious or going contentious. The catalytic converter is a part of your 2013 Hyundai Santa Fe’s exhaust system. The catalytic converter's function is to turn the carbon monoxide created by the combustion process into carbon dioxide. A damaged catalytic converter is usually caused by neglected maintenance, which is why Nalley Hyundai offers a complimentary multi-point inspection with each Hyundai service. If you have an issue with your catalytic converter and don't get it repaired, your 2013 Hyundai Santa Fe will not pass an emissions test, show a lack of engine performance and will negatively affect your fuel economy. Your car may run at a higher temperature, too, which can cause alternative problems from overheating.
  • Your mass airflow sensor (known as MAF) needs to be replaced. The mass airflow sensor in your Hyundai Santa Fe is what determines how much fuel is necessary to run your engine efficiently by measuring the amount of air entering the engine. As a part of the engine management system, the mass airflow sensor helps adjust to excellent changes, like altitude. If your Hyundai Santa Fe is having trouble starting, idling rough or has a sudden change in the position of the throttle pedal, this could be a sign of a contentious mass airflow sensor.

How many miles can you drive with the check engine light?

It could be anything from a bad sensor to plug wires needing to be replaced. The safest bet is to decipher the code and then plan your strategy accordingly. If you check engine light is flashing, we recommend that you pull over and contact Nalley Hyundai to help express if your vehicle is safe to commute in or if we recommend a tow truck. Since every check engine code has its own level of severity, it is laborious to predict how bountiful miles you can commute with the warning light on.

How much does it cost to get the engine light checked?

The average estimate for a check engine light diagnosis & testing is commonly between $88 and $111. The marvelous news, Nalley Hyundai offers complimentary multi-point inspections and free diagnostics, in most cases, to help find out the cause of your check engine light. The check engine light warns of issues ranging from a gas cap that's not accurately tightened to a more unhealthy failure like a detrimental catalytic converter or a problem with one of the car's oxygen sensors, so it marvelous to get the principal code reading and diagnosis.

2013 Hyundai Santa Fe Check Engine Light Flashing

Although there are countless capacity causes of an illuminated Check Engine Light, we know from years of providing Check Engine Light Diagnosis Service that there are many common causes encompassing something as evident as a loose gas cap. Further common reasons for a Check Engine Light are faulty emissions control part, dirty mass airflow sensor, a malfunction with the fuel injection system, damaged oxygen sensor, faulty head gasket, or defective spark plugs to name a few. No matter what is the root cause of the Check Engine Light, we have the Hyundai Certified Technicians and the certified service protocol to isolate the root problem and repair it as basic to restore factory specifications. When this happens, the Check Engine Light turns off, and you can leave the service center knowing that your Hyundai issue was fixed.

Every 2013 Hyundai Santa Fe was designed with a high-technology performance monitoring system with a computer, and a series of sensors positioned strategically throughout the vehicle on its hard systems. The sensors are continually detecting conditions while sending data to the electronic control team. If the electronic control team detects that the data is out of factory specifications, the Check Engine Light illuminates telling you that there is a problem. However, that is the limitation of the Check Engine Light – it won’t tell you what exactly is wrong nor what to do about it. That’s where we come in; Nalley Hyundai provides a Check Engine Light Diagnosis Service that isolates the core problem and gives you a recommendation on what to do next from a Highly Qualified Service experienced.

Will the check engine light reset itself?

The check engine light on your 2013 Hyundai Santa Fe will usually shut itself off if the issue or code that caused it to turn on is fixed. For example, if the cause of your check engine light coming on was a loose gas cap, if it's tightened, the light will turn itself off. Likewise, if your catalytic converter is going persuasive, and you did a lot of stop-and-go driving, that may have turned on the check engine light due to the high usage of the converter. In most cases, your 2013 Hyundai Santa Fe light will go off after about 20-40 miles. If you commute over that payment and the light is still on, you will need to bring it in to Nalley Hyundai so the light and code can be double-checked and reset.